Contents
Many people have trouble setting their La Crosse Technology clock. Here are some easy instructions to follow to make sure you get it set correctly.
Checkout this video:
Introduction
Most digital clocks are pre-programmed at the factory with the current time and day. Occasionally, you may need to reset the clock due to a power outage or change in time zone. Clocks manufactured by La Crosse Technology can be set manually. The process is straightforward and can be completed in just a few minutes.
Unpacking the Clock
Before you can set the time on your La Crosse Technology clock, you need to unpack it and make sure all the parts are accounted for. You should have received the following items:
-One La Crosse Technology clock
-One AA battery
-One instruction manual
Once you have all the necessary parts, follow these instructions to set up your clock.
Setting Up the Clock
If your La Crosse Technology clock is not working properly, you may need to reset it. To do this, follow these steps:
1. Locate the “Mode” button on the back of the clock.
2. Press and hold the “Mode” button for three seconds.
3. Use the up and down arrows to set the time, date and day of the week.
4. Press the “Mode” button to save your settings and exit the setup menu.
Mounting the Clock
Most La Crosse Technology clocks come with instructions on how to mount them. In general, you will need to use the included hardware to mount the clock to a wall. It is important to make sure that the mounting surface is clean and smooth before attaching the clock. Once the clock is mounted, you can set the time and date using the buttons on the front of the clock.
Adjusting the Clock Hands
There are two ways to set the time on your La Crosse Technology clock: by moving the hands manually or by synchronizing the clock with a time signal. To adjust the clock hands manually, first turn the knob on the back of the clock to the “H” position. Use your finger to move the minute hand forward or backward until it points to the correct minute. Then, turn the knob to the “M” position and move the hour hand until it points to the correct hour. Finally, turn the knob back to the “H” position.
To synchronize your clock with a time signal, first make sure that it is within range of a suitable time signal by checking the list of compatible time signals in your user manual. Then, turn the knob on the back of your clock to the “S” position. The second hand will start moving and will stop when it receives a strong enough signal. If it does not receive a strong enough signal, it will continue moving until it finds one or you turn off synchronization mode by turning the knob back to “H” position.
Setting the Time Zone
The first thing you need to do is set the time zone. To do this, press and hold the “TIME ZONE” button for three seconds. The display will flash. Use the up and down arrows to choose your time zone. Press “SET” when you’re done.
Changing the Display
There are a few things you can change on the display of your clock, such as the time format, date format, and the temperate format. By default, the time format is set to a 12-hour clock. To change the time format:
1. Press and hold the MODE button for 3 seconds.
2. Use the UP or DOWN arrow buttons to scroll through the options until you see “Time Format”.
3. Press and release the MODE button to select “Time Format”.
4. Use the UP or DOWN arrow buttons to scroll through the time formats (12h or 24h).
5. Press and release the MODE button to save your selection.
Setting the Alarm
To set the alarm on your La Crosse Technology clock, first make sure that the time and date are set correctly. Then, press the “ALARM” button on the top of the clock until the display shows the time you want the alarm to sound.
Next, press the “MODE” button until the display shows “ALARM ON.” You can then press the “UP” or “DOWN” arrow buttons to adjust the volume of the alarm.
Once you have the alarm set how you want it, press the “SNOOZE/LIGHT” button to turn on the backlight and see what time it is. The backlight will stay on for five minutes unless you press the button again.
To turn off the alarm, just press and hold down the “ALARM” button until the display shows “ALARM OFF.”
Troubleshooting
If your La Crosse Technology clock is not working properly, there are a few things you can do to troubleshoot the issue. First, check the batteries. If they are low, replace them with fresh batteries. Next, check the time setting. If the clock is not set to the correct time, adjust it accordingly. Finally, if the clock still does not work properly, reset it by pressing and holding the “Set” button for three seconds.
Conclusion
In conclusion, the process of setting your La Crosse Technology clock is relatively simple and straightforward. By following the instructions above, you should be able to easily adjust the time on your clock. If you have any further questions or concerns, feel free to contact La Crosse Technology directly for assistance.
